Connectors & Wiring Pack – PH 2.0, ZH 1.5 and GH 1.25 mm Connector Kits, 300 Jumper Caps, 328 Heat-Shrink Pieces
2,558 parts: two PH 2.0 mm kits, ZH 1.5 and GH 1.25 mm housing kits with crimp pins, 300 jumper caps and 328 heat-shrink pieces.
Designed by Mematrix Lab
Description
Small-pitch connectors and wiring supplies
The connectors you meet on batteries, sensors, flight controllers and small modules, plus the bits that make wiring tidy: two PH 2.0 mm kits with headers, housings and crimp pins, ZH 1.5 mm and GH 1.25 mm housing kits with their crimp pins, 300 jumper caps in three pitches, and 328 pieces of coloured heat-shrink tubing. 2,558 parts in compartment boxes.
What's in the pack
| Box | Contents | Qty |
|---|---|---|
| PH 2.0 mm kit (2 boxes) | headers and housings 2–6 pin, 600 crimp pins | 920 |
| ZH 1.5 mm kit | housings 2–10 pin, 200 crimp pins | 430 |
| GH 1.25 mm kit | housings 2–8 and 10 pin, 500 crimp pins | 580 |
| Jumper caps | 2.54 / 2.0 / 1.27 mm, 15 types × 20 | 300 |
| Heat-shrink tubing | assorted diameters and colours | 328 |
| Total | 2558 |
PH 2.0 mm connectors (two kits)
| Part | 2-pin | 3-pin | 4-pin | 5-pin | 6-pin |
|---|---|---|---|---|---|
| Through-hole header (PH-A) | 40 | 40 | 40 | 20 | 20 |
| Crimp housing (PH-Y) | 40 | 40 | 40 | 20 | 20 |
Plus 600 crimp pins. 2.0 mm pitch: the usual connector on single-cell LiPo batteries, small speakers and many sensor boards.
ZH 1.5 mm housings
| Pins | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
|---|---|---|---|---|---|---|---|---|---|
| Housings | 30 | 30 | 30 | 30 | 30 | 20 | 20 | 20 | 20 |
Plus 200 crimp pins. 1.5 mm pitch, common on small brushless gimbals, LED strips and compact boards.
GH 1.25 mm housings
| Pins | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 10 |
|---|---|---|---|---|---|---|---|---|
| Housings | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Plus 500 crimp pins. 1.25 mm pitch with a positive latch: the connector used on many flight controllers, GPS modules and telemetry radios.
Jumper caps, 20 of each type
300 caps in 15 types: 2.54 mm caps in several colours, plain and with a pull tab, plus black 2.0 mm and 1.27 mm caps. They short two header pins to set a board option or address.
Heat-shrink tubing
328 pre-cut pieces in assorted diameters and five colours (red, yellow, green, blue, black) for insulating solder joints and colour-coding wires. Shrink it with a hot-air gun or hair dryer rather than a flame.
Good to know
- The housings take crimp pins, which need a crimp tool for that pitch (a PH/XH tool for 2.0 mm, a fine-pitch tool for 1.5 and 1.25 mm). The ZH and GH kits contain housings only, without board headers.
- Check the polarity of a battery or module lead before plugging it in: the same housing is wired either way round by different makers.
- Parts are bagged and labelled by value or part number and packed by hand by our supplier, so a bag can occasionally hold a few pieces more or less than listed, or a close substitute value. Some bag labels are printed in Chinese next to the part numbers.
- Contains small parts. Not a toy; keep away from young children.
Specs and Docs
- Parts
- 2,558
- Pitches
- 2.0, 1.5, 1.25 mm
- Boxes
- 5 boxes + 1 bag
Shipping
Standard shipping: $9.00 for the first item, +$1.80 for each additional item. Free shipping on orders over $260.
We ship worldwide, by default with economical international post (UPU / China Post small packet) to keep shipping costs low. Orders are usually handed to the carrier within 2–5 business days, and economical international post then takes about 10–30 business days to arrive; these are estimates, not guarantees. Delivery time depends on the destination and on postal and customs handling. If you need your order by a certain date, email us before ordering: faster shipping can be arranged, with the extra cost charged at the carrier's actual rate. Items that contain batteries or magnets are marked on their product page and ship by a special carrier line; some countries and regions cannot be reached by that line, and if yours is one of them we refund the order in full.
Customs & duties
Import duties, taxes and customs requirements depend on the destination country, the shipping route and the local customs office, so we cannot say in advance whether any will apply to your parcel. Customs may hold a parcel, ask for more information, or ask for duties or taxes to be paid, even when the declared value is correct. If you have a question about your country, email us before ordering.
See our shipping & returns policy.