Motor Mount & Bracket Pack – 130 Motor Clamps and Mounts, Aluminium Corner Brackets, Perforated Plates, Mini L Angles
30 mounts for 130/180 motors, 14 aluminium corner bracket sets, 16 perforated aluminium plates and strips, 100 mini L angles.
Designed by innoelement
Description
Mount the motor, then build the frame around it
Small DC motors need something rigid to hold them, and the frame around them needs brackets and plates that don't flex or crack. This pack has both, in metal and tough ABS: 20 steel clamps and 10 ABS mounts for 130 and 180 size motors, 14 aluminium corner brackets with their screws and T-nuts, 16 perforated aluminium plates, channels and strips, and 100 tiny steel L angles that hold 2 to 3 mm axles. It goes well with 3D-printed parts, wooden or acrylic bases and aluminium extrusion.
What's in the pack
| Part | Contents | Qty |
|---|---|---|
| Steel motor clamps | For 130 and 180 motors | 20 |
| ABS motor mounts | 5 black, 5 yellow | 10 |
| Aluminium corner brackets 1515 | With M4 screws and T-nuts | 10 sets |
| Aluminium corner brackets 2020 | With M5 screws, T-nuts and washers | 4 sets |
| Perforated aluminium parts | 16 different plates, channels and strips | 16 |
| Mini L angles | 50 with 2 mm holes, 50 with 2.5 / 3 mm holes | 100 |
| Total | 160 |
Steel motor clamps, 20
| Material | Fits | Fixing holes |
|---|---|---|
| 0.5 mm plated steel strip, 10 mm wide | 130 and 180 size motors | 4 × 2.3 mm, for M2 to M2.3 screws |
The clamp wraps over the motor can and screws down on both sides. Light, cheap and strong enough for small cars, fans and boats. Screws are not included; the M2 screws of our hardware pack fit.
ABS motor mounts, 10
| Colour | Size | Inside | Qty |
|---|---|---|---|
| Black | 39.5 × 27 × 17 mm | 20 × 25 mm | 5 |
| Yellow | 39.5 × 27 × 17 mm | 20 × 25 mm | 5 |
A box-shaped holder with 2 mm walls: the motor slides in from the side and the base has 2 and 3 mm holes for M2 or M3 screws. Fits 130 motors and the 180 motors with flat sides (PH and SH types). About 3.7 g each and reusable.
Aluminium corner brackets with screws and T-nuts, 14 sets
| Size | Bracket | Slot | Hardware per set | Sets |
|---|---|---|---|---|
| 1515 | 15 × 20 × 20 mm, 5 g | 4 × 6 mm | M4 screws and T-nuts | 10 |
| 2020 | 20.3 × 28 × 28 mm, 10 g | 9 × 6 mm | M5 × 10 screws, T-nuts and washers | 4 |
Cast aluminium 90° brackets for joining 15 and 20 mm aluminium extrusion, or for squaring up a wooden or printed frame. The T-nuts slide into the slot of the extrusion.
Perforated aluminium plates, channels and strips, one of each
| Part | Size | Weight |
|---|---|---|
| 50 × 90 mm plate | 5 × 9 holes | 20.4 g |
| 50 × 70 mm plate | 5 × 7 holes | 16.6 g |
| 30 × 70 mm plate | 3 × 7 holes | 9.6 g |
| 26 × 50 mm plate | 5 holes and a 4 × 44 mm slot | 5.5 g |
| 3-hole U-channel | 26 mm long, 15.5 mm high | 2.2 g |
| 5-hole U-channel | 46 mm long, 16 mm high | 3.3 g |
| 9-hole U-channel | 71.5 mm long, 12.5 mm high | 4.0 g |
| Angle strip | 15 × 15 × 100 mm, slotted | 11.1 g |
| Flat triangle | 63 × 45 mm, 7 holes | 6.6 g |
| Upright triangle | 50.5 × 30.5 mm with a 15 mm flange | 6.5 g |
| 2-hole strip | 19.5 mm, one slotted hole | 0.7 g |
| 3-hole strip | 30 mm | 1.2 g |
| 7-hole strip | 70 mm | 3.0 g |
| 9-hole strip | 90 mm | 4.0 g |
| Slotted strip | 20 × 120 mm, three slots | 9.4 g |
| 2-hole bracket | 12 mm high, one slotted hole | 0.9 g |
All parts are 2 mm aluminium with 4 mm holes on a 10 mm pitch, so they line up with each other and take M4 or M3 screws. Use them as motor plates, axle brackets, chassis rails and gussets.
Mini L angles, 100
| Type | Base | Side holes | For | Qty |
|---|---|---|---|---|
| Small hole | 5.5 × 9 mm, 2 × 2 mm holes | 2 × 2 mm | 2 mm axles | 50 |
| Large hole | 5.5 × 9 mm, 2 × 2 mm holes | 2.5 and 3 mm | 2.5 and 3 mm axles | 50 |
0.6 mm plated steel, 10 mm high. Glue or screw two of them to a base and push an axle through the side holes for a quick wheel or gear mount. They also work as tiny corner pieces in architectural models.
Good to know
- Motors, extrusion and screws for the clamps and plates are not included. The corner brackets come with their own screws and T-nuts.
- Sizes are the supplier's hand measurements and can differ slightly.
- About 0.45 kg packed, so there is no weight surcharge on this pack.
- Small parts are counted and bagged by our supplier, so a bag of L angles can occasionally hold a piece more or less than listed.
- Contains small parts. Not a toy; keep away from young children.
Specs and Docs
- Parts
- 160
- Motors
- 130 and 180 size
- Hole pitch
- 10 mm, 4 mm holes
Shipping
Standard shipping: $9.00 for the first item, +$1.80 for each additional item. Free shipping on orders over $260.
We ship worldwide, by default with economical international post (UPU / China Post small packet) to keep shipping costs low. Orders are usually handed to the carrier within 2–5 business days, and economical international post then takes about 10–30 business days to arrive; these are estimates, not guarantees. Delivery time depends on the destination and on postal and customs handling. If you need your order by a certain date, email us before ordering: faster shipping can be arranged, with the extra cost charged at the carrier's actual rate. Items that contain batteries or magnets are marked on their product page and ship by a special carrier line; some countries and regions cannot be reached by that line, and if yours is one of them we refund the order in full.
Customs & duties
Import duties, taxes and customs requirements depend on the destination country, the shipping route and the local customs office, so we cannot say in advance whether any will apply to your parcel. Customs may hold a parcel, ask for more information, or ask for duties or taxes to be paid, even when the declared value is correct. If you have a question about your country, email us before ordering.
See our shipping & returns policy.